Securall Hazmat Storage Locker, Equipped w/ Damage Limiting Construction Panel, Sump Capacity: 16x 55 Gal. Drums - B1600X

Hazmat Storage Lockers & Buildings are specifically designed for hazardous material storage and dispensing from 55-gallon drums containing flammable or combustible liquids.

Outer wall is constructed of all-welded 16 or 12 gauge steel. Inner wall is constructed of 20 gauge steel.

The double wall construction contains 3" of air space throughout. All Hazmat Storage Buildings are designed in accordance with the standards set forth by NFPA Code 30 and comply with OSHA and EPA regulations.

All models are FM Approved for the storing and dispensing of flammable and combustible liquids.

All electrical options are U.L. Approved & installations are compliant to current state approved NEC regulations. Electrical Classification available at an additional charge.

2 Hour Fire Rating Upgrade - Industry's 1st & Only Intertek Tested and FM Approved 2 hrs fire rated wall construction built with 1.5 hour fire rated roof construction, 1.5 hour fire rated door construction, and multiple layers of ¾” gypsum ultracode wallboard. Air inlet vents with UL Listed and labeled fire damper with louvers. Dampers have a galvanized steel frame, curtain-type galvanized steel blades and a UL Listed 165° F fusible link.

4 Hour Fire Rating Upgrade - Industry's 1st & Only Intertek Tested and FM Approved 4 hrs fire rated wall construction built with 3 hour fire rated roof construction, 3 hour fire rated door construction, and multiple layers of ¾” gypsum ultracode wallboard. Air inlet vents with UL Listed and labeled fire damper with louvers. Dampers have a galvanized steel frame, curtain-type galvanized steel blades and a UL Listed 165° F fusible link.

Explosion Relief Panel - Used in the construction of buildings designed to store Class IA and Class IB flammables. Explosion relief panels limit the damage within an enclosed hazardous location. When the panel(s) are subjected to an explosive force, the pressure relieving panel quickly vents the force before it causes major damage. The panels are designed to release at 20 psf.

Easy To Ship: Securall's Chemical Storage Buildings (B1200 and below) are designed to fit in a standard high cube shipping container reducing shipping costs and labor time.  

We are approved to install Damage Limiting Construction Panel on non rated and Fire Rated buildings.   

Features:

• Models B200 through B1200 Exterior Walls: 16 gauge galvannealed steel. 

• Models B1600 through B8000 Exterior Walls: 12 gauge galvannealed steel. .

• Interior Walls: 20-gauge galvannealed steel (3" air space between walls)             

• Sump: 12-gauge steel liquid tight, continuously welded.            

• Grating: Removable galvanized steel (Optional)             

• Forklift channel: 12 gauge galvanized steel            

• Grounding: NFPA & OSHA Compliant Static ground connection inside and out on all explosion rated models            

• Labeling: NFR warning label, Hazard Ratings System, Instructions            

• Explosion Relief Panels: 22 gauge steel opening protected by expanded steel            

• Available with 2 or 4 hour fire rating            

• Chemical/corrosive/ultraviolet resistant paint            

• Removable galvanized steel safety floor planking           

• Safety Floor Planking: Slip resistant planking 13" wide, 12 gauge galvanized steel with raised perforated buttons and debossed holes protruding down. Galvanized steel floor planking above sump area for maximum corrosion resistance. Floor planking designed to sustain a minimum uniformly distributed load of 250 pounds per square foot. Floor planking and supports are removable to facilitate sump cleaning in the event of a spill.

• Door Style: Door for B200-B400 Provide one (42" wide x 62.5”) and B600-B1200 Provide one (42” wide x 80”) high door to facilitate the unloading and loading of hazardous material within the building. Installed with a UL Classified commercial grade keyed lockset. The door shall serve as personnel entrance and exit.
  Door for B1600-B8000 Provide one 60” wide x 80” high double door to facilitate the unloading and loading of hazardous material within the building. Installed with a UL Classified commercial grade keyed lockset. The double door shall have one active leaf to serve as personnel entrance and exit. The active leaf must be equipped with a door closer available on B600-B1200 fire rated models.

• Explosion Relief Panel: Used in the construction of buildings designed to store Class IA and Class IB flammables. Explosion relief panels limit the damage within an enclosed hazardous location. When the panel(s) are subjected to an explosive force, the pressure relieving panel quickly vents the force before it causes major damage. The panels are designed to release at 20 psf..

• Factory Mutual System Approval: Securall Fire-Rated Hazardous Material Storage Buildings (10'H X 42'W X 9'D Max Dimensions) carry the Factory Mutual System Approval label and are constructed based upon UL Fire Resistance Ratings classification criteria. In addition, all Fire-Rated Buildings come with hydraulic operated self-closing, fire-rated doors and fire damper protected vents

What's Included:

✓ Securall Hazmat Locker w/ Damage Limiting Panel - B1600X

✓ Limited 15 Year Structural Warranty

Specifications: